hotun hiflo 100c 15x32mm Dry Trap Tundish
High-Flow Dry Trap Tundish For Higher Discharge Rates
PATENTED, PIONEERING PRODUCTS
High-flow protection. The next generation of dry trap tundish!
The hotun hiflo 100c 15x32mm dry trap tundish is designed for applications that require a higher flow capacity than the standard hotun 100c. It has a rated flow rate of 18 litres per minute (LPM), increasing to a maximum of 20 LPM when installed with optimised pipework.
As a result, this makes it a suitable option for installations where the potential discharge from a relief valve may exceed the capacity of the standard model.
Comparing The hotun hiflo 100c 15x32mm With The hotun 100c 15x22mm
The main differences between the two models are their flow capacity and outlet connection. The standard hotun 100c has a rated flow rate of 12 LPM and a maximum flow rate of 16 LPM. In comparison, the hotun hiflo 100c offers a higher rated flow of 18 LPM and a maximum of 20 LPM with optimised pipework.
The outlet connection is also different. The standard hotun 100c has a 22mm outlet, while the hotun hiflo 100c features a larger 32mm outlet. As a result, this accommodates 32mm or 1¼-inch push-fit or universal mechanical fittings, offering greater flexibility when connecting to suitable waste or soil pipework.
The Benefits Of Using A Dry Trap Tundish
Both the hotun hiflo 100c and the standard hotun 100c combine a tundish with an integrated dry trap. This allows discharge water to remain visible for inspection, while the dry trap helps prevent foul odours from the waste system entering the building.
Ultimately, choosing between the two models comes down to the required flow capacity and outlet connection for the installation.
Compatible With hotun detect And hotun detect remote
hotun hiflo 100c can also be used with compatible hotun alarm products to provide additional monitoring of discharge water.
- hotun detect – An in-tundish water detection alarm designed to alert users when water is detected within the tundish.
- hotun detect remote – Adds a remote alarm unit, allowing an alert to be heard away from the tundish installation.
Therefore, installers can consider these alarm options when additional awareness of water discharge is beneficial. Always check the relevant product specifications to confirm compatibility.
Key Product Information
About hotun hiflo 100c Dry Trap Tundish
Key product information at a glance.
- Key Features & Benefits
- Compatible 32mm and 1¼" Outlet Connections
- Installation Diagrams
- Product Specification
- Product Warranty
- Technical Drawing
Key Features:
- Compliant with ALL Building (G3 AND H1) Regulations and Water Regulations (not just some)
- Open-sided construction to ensure “SIGHT” of both flowing AND residual water (vital for complete visual fault diagnosis)
- Easy access to tundish bowl to “TOUCH” for verification of diagnosis
- Pressure tested to H1 Building Regulation standards to ensure no foul gasses or “SMELLS” enter the occupied space
- Upgradable to hotun detect alarm to provide an automatic audible fault indication to “HEAR” if the PRV drips
- All metal components are high-grade (freshwater) 302 stainless steel to ensure no corrosion
- The diaphragm (valve) is made from moulded (not sheet material) high-quality drainage grade EPDM rubber for extended service life
- Pioneering and Patented design and industry-tested for over TEN years fitted on 100s of thousands of installations
- Time-tested and industry-approved product & specially designed for applications as indicated
- Verified and published flow rates (UKAS and/or KIWA independently tested)
- Your choice, black or white, compression or push-fit to suit your “TASTE” of installation
- Most compact in class (from 73mm) between pipes, fits in the tightest of spaces
- Manufactured to ISO 9001 & ISO 14001 standards in a British (award-winning) factory.
- Supplied with hotun shield, a ventilated safety shield designed to help prevent accidental contact with potentially scalding discharge water.(fitted on a risk assessment basis)
- Specifically manufacturer allowed for use with many of the world’s leading industries’ products
- Approvals:
- WRAS approved dry trap tundish
- KIWA (KUKreg 4) approved/compliant dry trap tundish
- hotun products come complete with
- Full installation, maintenance, and warranty instructions
- Benchmark-style installation sign-off and annual service confirmation form
Key Benefits:
- 10-Year Warranty (see installation and warranty booklet)
- Other dry trap tundishes on the market can’t compete with the hotun benefits
- Award Winning (TPIA Innovation product of the year) and industry critically acclaimed product
The 1 1/4″ (32mm) outlet on the hiflo version is compatible with either universal compression or push-fit fittings.
Due to the material used in hotun’s acetyl plastic body it will not successfully solvent weld, and due to its size, female solvent weld fittings will be too large for the male spigot.
It must also be noted that many solvent weld pipes are not of a sufficient grade (material) and are therefore not suitable to be used in unvented hot water heater D2 discharges when connected to a TEMPERATURE RELIEF VALVE discharge line*.
*NB – this note about the suitability of pipework materials is only relevant to applications that have a TEMPERATURE RELIEF VALVE operating at temperatures above 90°C over several cycles of flow.
For all applications that have a pressure relief valve only (eg boilers and small unvented water heaters) the issue of temperature and volume of water is not an issue and a much wider range of materials will be suitable for use.
If you are unsure of these requirements please feel free to contact our technical team on our contact us page and we will be able to fully discuss these issues with you.
|
Inlet Pipe Size |
15mm (or 1/2″ for imperial applications) |
|
Inlet Connection |
15mm Compression nut and olive (supplied) |
|
Outlet Pipe Size |
32mm – (1 1/4″ equivalent) |
|
Outlet Connection |
Suitable for 32mm or 1 1/4″ push-fit or universal mechanical fittings – see compatible connection diagrams below – (The hotun hiflo 100C outlet size is not compatible with solvent weld fittings) |
|
Rated Flow Rate |
18LPM |
|
Max Flow Rate |
20LPM (with optimised pipework – 200mm straight pipe before tundish see optimised diagrams below) |
|
Usual Applications |
|
NB
1. All D2 downstream pipework and soil pipes for unvented hot water heaters (with Combined T/PRV’s) must be suitably rated for water discharging at 90-95°C.
2. Appliances with PRV’s only (ie boilers and water heaters of less than 15L capacity) do not need a D2 waste pipe temperature requirement
10 Year Conditional Warranty*
RA Tech UK Ltd provides a 10 Year Conditional Warranty, the installer must register the product within 14 days of the installation date. Failure to register the product and carry out the annual service may invalidate the warranty.
A copy of the Installation Commissioning and Warranty Instructions MI 2024 v1.3a and Commissioning Record must be filled out and a copy returned to RA Tech UK Ltd at time of installation, or the registration form found here, must be filled out and submitted from our website within 14 days of the installation date.
If you have multiple installations on a single project, you can group the entire installation into one project application
In subsequent years, the tundish must have the annual service checks and subsequent service records filled out by a competent engineer, to continue to validate the conditional warranty.
When installed in compliance with the installation instructions, is registered and has all of its relevant annual service checks, all hotun dry trap tundishes are warranted for a period of 10 years for any manufacturing fault or defect.
The customer should be given the signed “Installation, Commissioning and Service Records” found on the installation leaflet at the completion of the installation.
Please follow this link to download a printable copy of the hotun range installation, operation, service and warranty instructions
In the unlikely event that the product develops a manufacturing fault during this period, in the first instance, please send an email to info@ratechuk.co.uk with the subject title of “Warranty Claim” stating the issue with the product, or call us on 01332 702678.
To register your hotun detect alarm unit, please fill out our online registration form here
Warranty Claims Procedure
If you think you have a faulty product, please fill out our hotun detect Warranty Claims Form or send an email to info@ratechuk.co.uk with the subject title of “Warranty Claim hotun detect” stating the date of purchase (with proof) and let us know what has gone wrong. Alternatively, you could call us on (01332) 702678 and speak to one of our team.
*(if registered – conditions apply)
Downloads & Information
Product information, technical data and installation examples all in one place.
Point Of Sale Leaflet
Product Guide
Technical Specification
Featured Installations
Upgrade With hotun detect & hotun detect remote
Need Additional Discharge Detection?
The hotun 100C hiflo dry trap tundish can be upgraded with hotun detect & detect remote, providing an audible and visual alert when water begins to discharge through the tundish
You May Also Like
Customers Also Bought
Real Installations
Trusted. Installed.
See how installers across the UK are using the hotun hiflo 100C dry trap tundish in real-world systems. Browse our featured installations for inspiration.
Ron Clancy
Chris Smith
Rhodri Jones
Robert Alan Jamison
Product Resources
Downloadable Images
Download high-quality product images.
Product Selector Guide
Discover The Right hotun Solution For Your Requirements
Use the product selector to quickly identify the most suitable hotun solution for your application.
1. Select your installation type
Choose the option that best matches your boiler or heating system.
2. Select the required temperature
This helps determine which hotun product is suitable for your installation.
3. View your recommended product
The selector will guide you towards the appropriate product and provide further information.
Need help choosing?
If you’re unsure which product you need, contact our technical team for assistance.
What are you looking for?
Select the option that best describes what you need.
What system is the tundish being used with?
This helps us identify the appropriate tundish range.
What connection size do you require?
Choose the connection size, or select unsure if you need help identifying it.
Where do you want the discharge alarm?
Choose where you want the alarm to be heard.
Would you like detection at the installation as well?
hotun detect provides audible and visual indication of water discharge.
Which protection do you require?
Select the application or range you are working with.
Would you like discharge detection too?
Add hotun detect to provide audible and visual warning of water discharge.
How many discharge pipes are you connecting?
This helps identify the appropriate condensate solution.
Would you like discharge detection too?
Add hotun detect if you want audible and visual warning of water discharge.
Your recommended hotun solution
Based on your answers, the following hotun products form the suggested solution for your installation.
Find your nearest hotun stockist
Enter your postcode and we'll take you straight to the hotun Store Locator.

















