hotun 100c 15x22mm Dry Trap Tundish

The Original Compression Dry Trap Tundish 

PATENTED, PIONEERING PRODUCTS 

The first and original dry trap tundish!

The hotun 100c 15mm x 22mm dry trap tundish combines a tundish and dry trap in one unit, providing a safe, visible discharge from a relief valve to a local waste or soil pipe. This allows water to discharge from the T/PRV while the built-in dry trap helps prevent unpleasant odours from entering the building through the waste system.

In addition, the hotun 100c provides backflow and backflow protection to help prevent contamination of wholesome water supplies when connected to the waste pipe in Category 5 risk water applications.

Why Choose a Dry Trap Tundish?

Relief valves may only operate occasionally. As a result, a conventional wet trap can dry out over time, allowing foul odours to enter the building. This is why a dry trap tundish is particularly suitable for PRV discharge applications.

The hotun 100c dry trap tundish has been specifically designed and manufactured for T/PRV discharge installations. Its open-sided design also makes it easy to see when water is passing through the tundish. Consequently, potential issues can be identified more easily, helping with diagnosis and routine maintenance.

Easy Maintenance and High-Quality Materials

The hotun 100c tundish can be cleaned easily while remaining in situ. This means that you do not need to remove or dismantle the unit for routine maintenance.

In terms of durability, the spring and bolt are manufactured from high-quality A2 stainless steel. Meanwhile, the valve is made from our own moulded, high-quality drainage-specification EPDM rubber.

Unlike products made from sheet material, the hotun 100c  dry trap tundish uses a moulded construction. This allows us to maintain greater control over material quality and the finished product.

Temperature Rating and Warranty

The hotun 100c dry trap tundish is rated for temperatures of up to 120°C. Therefore, it is suitable for applications requiring a temperature-rated dry trap tundish.

For added peace of mind, all our tundish products come with a 10-year conditional warranty, subject to the applicable warranty terms.

Compatible hotun Products

The hotun 100c is compatible with the following products:

  • hotun detect – The world’s first in-tundish alarm unit designed to alert users when water is detected.
  • hotun detect remote – An evolution of our alarm system, featuring a remote alarm unit allowing alerts to be provided away from the location of the tundish.

Together, these products offer additional monitoring options for compatible installations.

Key Product Information

About hotun 100c Dry Trap Tundish 

Key product information at a glance.

  • Compliant with ALL Building (G3 AND H1) Regulations and Water Regulations (not just some)
  • 10-Year Warranty (see installation and warranty booklet)
  • Other tundishes on the market cant compete with the hotun benefits
  • Open-sided construction to ensure “SIGHT” of both flowing AND residual water (vital for complete visual fault diagnosis)
  • Easy access to tundish bowl to “TOUCH” for verification of diagnosis
  • Pressure tested to H1 Building Regulation standards to ensure no foul gasses or “SMELLS” enter the occupied space
  • Award Winning (TPIA Innovation product of the year) and industry critically acclaimed product
  • All metal components are high-grade (freshwater) 306 stainless steel to ensure no corrosion
  • The diaphragm (valve) is made from moulded (not sheet material) high-quality drainage grade EPDM rubber for extended life suitability
  • Approvals:
    • WRAS approved dry trap tundish
    • KIWA (KUKreg 4) approved/compliant tundish
  • hotun products come complete with
  • Pioneering and Patented design and industry-tested for over TEN years fitted on 100s of thousands of installations
  • Time-tested and industry-approved product & specially designed for applications as indicated
  • Verified and published flow rates (UKAS and/or KIWA independently tested)
  • Your choice, black or white, compression or push-fit to suit your “TASTE” of installation
  • Most compact in class (from 73mm) between pipes, fits in the tightest of spaces
  • Manufactured to ISO 9001 & ISO 14001 standards in a British (award-winning) factory.
  • Supplied complete with the hotun protect ventilated safety shield as standard, helping prevent accidental contact with potentially scalding discharge water.
  • Specifically manufacturer allowed for use with many of the world’s leading industries’ products

Click either image to enlarge in a new page

hotun 100C dry trap tundish typical installation diagram on a boilerTypical Installation Diagram-Small Unvented Water Heater-hotun 100C

 

 Inlet Pipe Size

 15mm (or 1/2″ for imperial applications)

 Inlet Connection

 15mm Compression nut and olive (supplied)

 Outlet Pipe Size

 22mm Copper or 21.5mm plastic

 Outlet Connection

 22mm Compression nut and olive (supplied)

 Rated Flow Rate

 12LPM

 Max Flow Rate

 16LPM (with optimised pipework – 200mm straight pipe before tundish see optimised diagrams below)

 Usual Applications

  • Small (<15L capacity) water heaters
  • boilers with PRV’s (unless otherwise stated by a boiler manufacturers specification/instructions)
  • HIU’s
  • Overflows from storage water tanks
  • Air conditioning unit drip trays
  • MVHR  condensation drip trays

 

10 Year Standard Warranty*

RA Tech UK Ltd provides a 10 Year Conditional Warranty, the installer must register the product within 14 days of the installation date. Failure to register the product and carry out the annual service may invalidate the warranty.

A copy of the Installation Commissioning and Warranty Instructions MI 2024 v1.3a and Commissioning Record must be filled out and a copy returned to RA Tech UK Ltd at time of installation, or the registration form found here, must be filled out and submitted from our website within 14 days of the installation date.

If you have multiple installations on a single project, you can group the entire installation into one project application

In subsequent years, the tundish must have the annual service checks and subsequent service records filled out by a competent engineer, to continue to validate the conditional warranty.

When installed in compliance with the installation instructions, is registered and has all of its relevant annual service checks, all hotun dry trap tundishes are warranted for a period of 10 years for any manufacturing fault or defect.

The customer should be given the signed “Installation, Commissioning and Service Records” found on the installation leaflet at the completion of the installation.

Please follow this link to download a printable copy of the hotun range installation, operation, service and warranty instructions

In the unlikely event that the product develops a manufacturing fault during this period, in the first instance, please send an email to info@ratechuk.co.uk with the subject title of “Warranty Claim” stating the issue with the product, or call us on 01332 702678.

To register your hotun detect alarm unit, please fill out our online registration form here

Warranty Claims Procedure

If you think you have a faulty product, please fill out our hotun detect Warranty Claims Form or send an email to info@ratechuk.co.uk with the subject title of “Warranty Claim hotun detect” stating the date of purchase (with proof) and let us know what has gone wrong. Alternatively, you could call us on (01332) 702678 and speak to one of our team.

*(if registered – conditions apply)

hotun 100c dry trap tundish is WRAS approved

WRAS Approved product

hotun 100C WRAS approval information:

WRAS Approval Number: 2101323

WRAS Approval Documents:

WRAS – Approval Certificate – hotun 100C – 2101323 – 29th Jan 2021

WRAS – Approval letter – hotun 100C – 2101323 29th Jan 2021

Downloads & Information

Everything You Need

Product information, technical data and installation examples all in one place.

Point Of Sale Leaflet

Download PDF

Product Guide

Download PDF

Featured Installations

View Projects

Upgrade With hotun detect & hotun detect remote

Need Additional Discharge Detection?

The hotun 100C dry trap tundish can be upgraded with hotun detect & detect remote, providing an audible and visual alert when water begins to discharge through the tundish

You May Also Like

Customers Also Bought

Other popular hotun products trusted by installers across the UK.

Real Installations

Trusted. Installed.

See how installers across the UK are using the hotun 100C dry trap tundish in real-world systems. Browse our featured installations for inspiration.

Kevin Helbig

Helbig’s Heating 

Dean Nelson

SumRo Plumbing & Heating
An installation by hotun brand ambassador Dan Young using a hotun dry tap tundish

Paul Barreca

1 Barr Plumbing & Heating
An installation by hotun brand ambassador Chris Smith using a hotun dry tap tundish

Jordan Gregory

J G Heating Plumbing

Product Resources

Downloadable Images

Download high-quality product images.

Product Selector Guide

Discover The Right hotun Solution For Your Requirements

Use the product selector to quickly identify the most suitable hotun solution for your application.

1. Select your installation type
Choose the option that best matches your boiler or heating system.

2. Select the required temperature
This helps determine which hotun product is suitable for your installation.

3. View your recommended product
The selector will guide you towards the appropriate product and provide further information.

Need help choosing?
If you’re unsure which product you need, contact our technical team for assistance.

Question 1

What are you looking for?

Select the option that best describes what you need.

Question 2

What system is the tundish being used with?

This helps us identify the appropriate tundish range.

Question 3

What connection size do you require?

Choose the connection size, or select unsure if you need help identifying it.

Question 2

Where do you want the discharge alarm?

Choose where you want the alarm to be heard.

Question 3

Would you like detection at the installation as well?

hotun detect provides audible and visual indication of water discharge.

Question 2

Which protection do you require?

Select the application or range you are working with.

Question 3

Would you like discharge detection too?

Add hotun detect to provide audible and visual warning of water discharge.

Question 2

How many discharge pipes are you connecting?

This helps identify the appropriate condensate solution.

Question 3

Would you like discharge detection too?

Add hotun detect if you want audible and visual warning of water discharge.

Your result

Your recommended hotun solution

Based on your answers, the following hotun products form the suggested solution for your installation.

Recommended hotun products

Find your nearest hotun stockist

Enter your postcode and we'll take you straight to the hotun Store Locator.

Please enter your postcode.