Jim Dixon (hotun Brand Ambassador)
Jim sent us a case study retrofitting hotun detect and a hotun dry trap tundish to an existing installation.
Jim has been a hotun Brand Ambassador for over a year now. Before he became one of our Brand Ambassadors, he was already using our hotun products to help his installations. In this case study, Jim describes the problems faced by his customer and what he did to overcome the issue.
Jim Dixon
“Just a quick run through of a recent fault on an unvented cylinder I was called out too.
A regular customer of mine called me regarding water dripping from the unvented cylinder and through the standard tundish. The customer had not noticed this and it had been dripping for some while (he is now dreading seeing his next water bill!).
I resolved the issue by recharging the expansion vessel and replacing the 6bar PRV. I recommended that the D2 discharge pipe was brought up to regs, as the tundish was out of day to day sight.
I replaced the standard tundish with a hotun dry trap tundish & included a hotun detect alarm. The alarm unit gives the customer the comfort of being able to get an automatic and audible alert if any more water starts to drip from the PRV (secondary fault indication).
The customer was more than happy to go with my recommendation & the hotun detect alarm is now in place. The customer is now safe in the knowledge that if an issue occurs again, they will be alerted straight away, they can then promptly call me to fix the issue. Potentially saving on any future high water bills!!
Regards Jim”
Case study retrofitting hotun detect – Pictures
Here are the before and after pictures. It was so easy for Jim to swap out the old standard tundish and replace with the new hotun white 100C 15×22 (product code – HW100C 15×22) dry trap tundish, with the hotun detect alarm unit (product code HDSW-1P)
Please also note that the hotun detect alarm unit allows the installer to write their phone number on the case of the product. This means that they get the call rather than the customer phone up another installer by mistake, and then you lose out on any paid remedial work
To get hold of our hotun products, find out who your local hotun merchant is here https://hotun.co.uk/store-locator/
To find out more about the work Jim does please take a look at his Facebook page here https://www.facebook.com/stewtonplumbing/
This concludes the case study retrofitting hotun detect